PPL Home>Rv-Parts-Rv-Accessories>RV Appliances>Water Heaters>Water Heaters>Suburban 5286A On-Demand Tankless Water Heater
PPL 14.99 Shipping Promo
X
$14.99 Shipping Promotion applies to Online Orders with Standard Ground Shipping to the lower 48 US States only.
Some restrictions apply. Simply add items to your cart and enter your shipping address to see if your order qualifies.

Suburban 5286A On-Demand Tankless Water Heater - 09-0107

$911.79
$597.99
Sale Prices Shown are Valid Until 11/16/24.


PRODUCT DESCRIPTION

Suburban 5286A On-Demand Tankless Water Heater

Item 09-0107 | MFR# 5286A

Enjoy endless hot water with Suburban's NAUTILUS 5286A On Demand Tankless Water Heater. No more limited hot water supplies. No more having to wait for water to reheat in a conventional tank. Take a hot relaxing bath whenever you want. Whether you are wanting to wash dishes or do the laundry you can rest assured you will have all the hot water you need for these tasks also. Have the luxury of being at home with the Suburban On Demand Water Heater. Get an infinite supply of hot water whenever and wherever, simultaneously from every fixture. 


With no storage tank to heat water, the Nautilus On Demand RV Water Heater reduces weight and increases efficiency by only operating when the need for hot water arises. This product weighs just 36 pounds, much less than a tank full of water. The Suburban On Demand Water Heater comes standard with a built in freeze protection mechanism.

Control your On Demand Water Heater from within the coach with either a standard ON/OFF switch and light (sold separately) or an upgraded On-Demand Control Center (sold separately) available in black or white. The On Demand Control Center provides precise temperature control for reliable and consistent comfort from the convenience of your RV.

Suburban's exclusive, technologically superior self-adjusting two-state modulating combustion system monitors inlet water temperature and flow GPM along with outgoing water temperature and flow GPM, automatically adjusting propane input to virtually eliminate flow reductions and temperature fluctuations.  The 3-Try Direct Spark Ignition makes for easy lighting and built-in freeze protection. 

If replacing a previous Suburban or Atwood Water Heater, an Access Panel and Vent Cap (both sold separately) will be required for installation. 

Specifications:
  • BTU/HR: 15,000 MIN to 60,000 MAX
  • Fuel: LP Gas (Propane)
  • Inlet Pressure: Minimum 10.5 Inches W.C. , Maximum 14 Inches W.C.
  • Manifold Pressure: 10.5 Inches W.C.
  • Water Operating Pressure: Minimum: 30 LBS PSI, Maximum: 150 LBS PSI
  • Voltage: 12 VDC Nominal; 10.5 VDC Minimum to 14 VDC Maximum
  • Water Flow Requirement: Minimum 0.5 GPM, Maximum 1.5 GPM
  • Minimum Wiring Gauge: 20 AWG 600V 105? F (Degrees Fahrenheit)
  • AMP Draw: 2.5 AMPS
  • Recommended Fuse Size: 2 Fuses with 5 AMPS per Fuse

FREQUENTLY BOUGHT TOGETHER
Suburban IW60 ON/OFF Switch with Light - Black
Item #: 73-0678 | Manufacturer #: 232229
Product Details
$13.16
Sale Prices Shown are Valid Until 11/16/24.
This item is temporarily unavailable.

More Details EXPAND

Product Cross-Sells
73-0678
Manufacturer
Suburban
Manufacturer Numbers
5286A, 09-0107
UPC List
755790709533
Popularity
1022
Heat Source
Propane
Water Heater Size (gal)
Tankless
Features
  • Exclusive 60,000 BTU Two-Stage Modulating Combustion System
  • Built-In Freeze Protection
  • The Exclusive 2-Stage Modulating Combustion System (M.C.S.) monitors: Inlet water temperature and water flow, output water temperature, heat exchanger and burner operation.
  • The 2-Stage MCS instantaneously adjust the LP gas input to provide consistent and endless comfort.
Specifications
  • MFG: Suburban
  • Type: LP
  • Ignition Type: Pilot and Direct Spark Ignition
  • Depth: 18" to 20.99"
  • Width: 12 1/2"
  • Height: 12 1/2"
  • BTU/HR: 15,000 MIN to 60,000 MAX
  • Fuel: LP Gas (Propane)
  • Inlet Pressure: Minimum 10.5 Inches W.C. , Maximum 14 Inches W.C.
  • Manifold Pressure: 10.5 Inches W.C.
  • Water Operating Pressure: Minimum: 30 LBS PSI, Maximum: 150 LBS PSI
  • Voltage: 12 VDC Nominal; 10.5 VDC Minimum to 14 VDC Maximum
  • Water Flow Requirement: Minimum 0.5 GPM, Maximum 1.5 GPM
  • Minimum Wiring Gauge: 20 AWG 600V 105? F (Degrees Fahrenheit)
  • AMP Draw: 2.5 AMPS
  • Recommended Fuse Size: 2 Fuses with 5 AMPS per Fuse
  • Warranty: 2 Year Warranty